caUTIon • TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. THERE ARE NO SERVICEABLE PARTS INSIDE. • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”...
Page 4
Never drop or insert an object into any opening. Protect the power adapter cord from being walked on or pinched, particularly at plug outlets, convenience receptacles and the point where it exits the unit. Do not allow the cord to touch hot surfaces. Wrap the cord loosely around the unit when storing.
Page 5
caUTIon • For ages 8 and up. • Keep the motorcycle away from face, eyes and hair at all times. Keep fingers away from moving wheels. • Recommended for outdoor use; if used indoors make sure there are no obstacles or breakable objects in the motorcycle's path. •...
fcc InfoRMaTIon This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received including interference that may cause undesired operation. WArnInG: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
locaTIon of PaRTs Motorcycle Antenna Front Wheel On/Off Switch AC Adapter Charging Port Remote Control Rear Wheel Motorcycle Antenna Protective Cover Stabilizer Bar (2)
InsTallInG The baTTeRIes 1. Turn the REMOTE CONTROL over to access the battery compartment on the back. 2. Remove the SCREW and remove the BATTERY COMPARTMENT COVER (see below). Screw Battery Compartment Cover Tabs 3. Insert (1) 9V battery according to the polarity indicators inside the compartment. 4.
seTTInG UP & chaRGInG YoUR MoToRcYcle Insert the MOTORCYCLE ANTENNA wire into the MOTORCYCLE ANTENNA PROTECTIVE COVER—then push the end of the MOTORCYCLE ANTENNA PROTECTIVE COVER into the antenna port securely. Make sure the ON/OFF SWITCH on the motorcycle is set to the OFF position. Connect the AC ADAPTER plug to the CHARGING PORT on the motorcycle and the AC ADAPTER to an electrical outlet.
If your motorcycle is heading for a collision with a spectator or hard object, cut the power by moving the FORWARD/STOP LEVER back. For best results, use the controls gently. Practice will improve your skills. Have fun! helPfUl hInTs not enouGH poWer? •...
caRe and MaInTenance • Turn the motorcycle off before cleaning. • Wipe motorcycle and remote housing clean with a soft, dry cloth. • Ensure there are no hairs or lint caught between the rear or front wheels and the drive shafts. Clean carefully with your fingers or a pair of tweezers.
(“Warranty Period”). If a defect arises and a valid claim is received within the Warranty Period, at its option, Brookstone will either 1) repair the defect at no charge, using new or refurbished replacement parts, or 2) replace the product with a new product that is at least functionally equivalent to the original product, or 3) provide a store credit in the amount of the purchase price of the original product.
Page 15
Brookstone, in so far as permitted by law, provides these products “as is. ” This warranty does not apply to: a) damage caused by failure to follow instructions relating to product’s use or the installation of components; b) damage caused by accident, abuse, misuse, fire, floods, earthquake or other external causes;...
Page 16
Merrimack, New Hampshire USA 03054 • 800-846-3000 • www.Brookstone.com 637728...
Need help?
Do you have a question about the u•Control and is the answer not in the manual?
Questions and answers