Draining The Fuel Tank And Carburetor; Engine Oil; Engine Cylinder; Handlebar Folding - Honda HARMONY II HRS216PDA Owner's Manual

Draining the Fuel Tank and Carburetor

1. Remove the carburetor drain bolt with a 10 mm wrench, and drain
the carburetor bowl fuel into an approved container.
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when
handling fuel.
2. Turn the fuel valve ON (see
page 9). This will allow fuel in
the fuel tank to drain through
the carburetor bowl. After the
fuel is completely drained,
reinstall the drain bolt.

Engine Oil

Change the engine oil (see page 33).

Engine Cylinder

Remove the spark plug (see page ). Pour a tablespoon (5 ~ 10 cc) of
clean engine oil into the cylinder. Pull the starter rope several times to
distribute the oil in the cylinder. Reinstall the spark plug. Pull the
starter rope slowly until resistance is felt then return the starter grip
gently. This closes the valves so moisture cannot enter.

Handlebar Folding

Remove the grass bag (if
installed). Loosen the handlebar
locking knobs. Press the
handlebar struts to release the
locating pins, then swing the
handlebar forward. Don't allow the
cables to be bent or pinched.
Stop the engine and keep heat, sparks,
and flame away.
Handle fuel only outdoors.
WARNING
DRAIN BOLT
LOCKING KNOB
STORAGE
43