Audio Note M2 Line Balanced Owner's Information page 12

Bedding in
Cleaning
Valve Life
OPERATION continued...
The new amplifier requires about 200 hours of initial use (called
"bedding in") before the circuitry becomes stable and optimum
performance is realized.
As the amplifier "beds in" the sound will become increasingly
smoother, detailed and open.
Once the amplifier has "bedded in" a warm up time of
approximately 30 to 45 minutes is required each time the
amplifier is switched on before optimum sonic performance is
reached.
No special maintenance is required for the amplifier. Use a
soft, clean lint free cloth to remove any surface marks from the
casework. For finger marks / grease, use a soft, clean lint free
cloth, lightly moistened with a solution of warm water and mild
detergent. Do not use any alcohol or solvent based cleaning
products, as they may damage the finish of the amplifier.
ENSURE THAT THE AMPLIFIER IS SWITCHED OFF AND
DISCONNECTED
SUPPLY BEFORE UNDERTAKING ANY CLEANING.
The valves supplied with your M2 Line Balanced Pre Amplifier
should provide approximately 5 years of operation. They are
specially selected by us, and should only be replaced with
valves of the same type and specification. Please consult your
Audio Note (UK) dealer should your valves need replacing.
Alternatively, feel free to contact us directly.
FROM THE MAINS ELECTRICITY