Optica P218Z Installation Manual
Hd outdoor 18x ptz speed dome network camera
Hide thumbs
Also See for P218Z:
- User manual (25 pages) ,
- Specifications (2 pages) ,
- Menu tree (65 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Optica P218Z
Summary of Contents for Optica P218Z
- Page 1 Optica P218Z HD Outdoor 18x PTZ Speed Dome Network Camera Installation Guide Ver. 1.4 003C72XWZX00...
- Page 2 Notice This manual provides the installation information for the P218Z PTZ Speed Dome. To work with the P218Z Camera, any installer or technician must have the following minimum qualifications: A basic knowledge of CCTV systems and components A basic knowledge of electrical wiring and low-voltage electrical hookups...
- Page 3 Installation Guide This symbol on the product or on its packaging indicates that this product shall not be treated as household waste in accordance with Directive 2002 / 96 / EC. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
-
Page 4: Warnings And Cautions
Installation Guide Warnings and Cautions Handle the camera carefully Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handing or storage. Installing electricity wiring carefully Ask qualified personnel of electrical wiring for the installation. Please note that input electricity to the unit is at tolerance of AC 24V ±... - Page 5 Installation Guide Never face the camera towards the sun Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, the camera may be smeared or damaged.
-
Page 6: Table Of Contents
Installation Guide Table of Contents Introduction ..........................6 Standard Package Contents ....................6 Camera Cable Connections ....................8 Switch / Connector Definition ..................8 Cable Requirements ...................... 9 3.2.1 Power Connection ..................9 3.2.2 Ethernet Cable Connection ................9 Camera Installation ....................... 10 Camera Dimensions .................... -
Page 7: Introduction
Installation Guide Introduction The P218Z Speed Dome IP Camera is designed to deliver superb performance and durability with an intelligent and stylish housing that is suitable in any security and surveillance installation. Standard Package Contents Before proceeding, please check the box contains the items listed here. If any item is missing or has defects, DO NOT install or operate the product and contact dealer for assistance. - Page 8 Installation Guide Compact Pendant Arm Lubricant Security Torx...
-
Page 9: Camera Cable Connections
Installation Guide Camera Cable Connections Before installing or connecting the P218Z Camera, please refer to this section and complete preparations for dome setups and various switch settings. There will be a PE cloth sheet covered inside the dome cover and a lens cap on the lens for shipping protection. -
Page 10: Cable Requirements
Installation Guide NOTE: DO NOT change the network Speed Dome Camera’s Communication Switch factory default settings. Cable Requirements For operation, the P218Z Camera requires power cable and RJ-45 as described below: 3.2.1 Power Connection Please refer to the illustrations below to connect power core through the supplied power adaptor. -
Page 11: Camera Installation
Installation Guide Camera Installation The PTZ Camera can be installed on ceiling, on wall or on pole. In the following sections, various PTZ Camera installation accessories, installation methods and installation procedures will be described in detail. The next section will provide the PTZ Camera’s dimensions for reference before installation. -
Page 12: Optional Accessories
Installation Guide Optional Accessories Mounting Accessories MNT-PEN-STD Standard Pendent Mount White; 348×104×138.6 mm (13.7×4.1×5.5 inches); 1.5 kg (3.3 lbs); Diameter: 45 mm (1.8 inches). Supplied with M8x12 screw x1, spring washer-8 x1, pendent tube washer x1, rubber washer-8 x1 and sponge x2. MNT-PEN-T25 Straight Tube –... - Page 13 Installation Guide MNT-PEN-SWAN Swan Tube White; Iron, Dimension: 835 x 300 mm (32.9×11.8 inches); Diameter: 45 mm (1.8 inches); Weight: 3.8 kg (8.4 lbs). Supplied with pendent tube washer x1, rubber washer-8 x1, waterproof rubber x1, spring washer-8 x1 and M8x12 screw x1. MNT-POLE-WIDE Pole Wide Direct Mount 270(L) x 170(W) x 60(D) mm (10.6 x 6.7 x 2.4 inches);...
-
Page 14: Wall Mount
Package Contents: Rubber Washer-8 x1 Pendent Tube Washer x1 Spring Washer-8 x1 M8x12 Screw x1 Items Needed: P218Z Camera Power Cable Ethernet Cable Compact Pendent Mount and equipped items Waterproof Rubber Screws and Screw Anchors for fixing the Compact Pendent Mount... - Page 15 Installation Guide 2) Fix the Compact Pendent Mount on the wall with proper screws and screw anchors. 3) Attach the Waterproof Rubber to the Compact Pendent Mount. 4) Run the cable(s) through the Compact Pendent Mount. NOTE: Please block the cable entry hole with the supplied sponge to avoid insects entering the Pendent Mount.
-
Page 16: Standard Pendent Mount
Installation Guide 4.4.2 Standard Pendent Mount Package Contents: M8x12 Screw x1 Spring Washer-8 x1 Pendent Tube Washer x1 Rubber Washer-8 x1 Sponge x2 Items Needed: PTZ Camera Power Cable Ethernet Cable Standard Pendent Mount and equipped items (optional accessory) Waterproof Rubber Screws and Screw Anchors for fixing the Standard Pendent Mount onto the ceiling Tools Needed:... - Page 17 Installation Guide 5) Thread the cable(s) through the Mounting Kit and join the Mounting Kit to the Standard Pendent Mount with the supplied screws and washers. Then adjust the Waterproof Rubber to the joint. 6) Connect the cable(s) to the PTZ Camera. 7) Join the PTZ Camera to the Mounting Kit with the supplied screw and washers.
-
Page 18: Swan Tube
Installation Guide 4.4.3 Swan Tube Package Contents: M8x12 Screw x1 Spring Washer-8 x1 Pendent Tube Washer x1 Rubber Washer-8 x1 Waterproof Rubber x1 Items Needed: PTZ Camera Power Cable Ethernet Cable Swan Tube Waterproof Rubber Screws and Screw Anchors for fixing the Swan Tube on the floor Tools Needed: Tool for drilling Tool for screwing... - Page 19 Installation Guide Wall Mount: Swan Tube + Mounting Kit...
-
Page 20: Ceiling Mount
Installation Guide Ceiling Mount Generally, there are three kinds of PTZ Camera ceiling mounting methods: hard-ceiling, in-ceiling and mounting with Straight Tube. Refer to the following sections for more details. The following figures show how cables connect to the PTZ Camera in different ways. - Page 21 Installation Guide NOTE : After threading the cables, please block the cable entry hole with the supplied sponge(s) to avoid insects entering the tube. 9) Fix the Mounting Kit to the Straight Tube with the supplied screws and washers. 10) Connect the cables to the PTZ Camera. 7) Mount the PTZ Camera to the Mounting Kit.
-
Page 22: Pole Mount
Installation Guide Pole Mount 4.6.1 Pole Wide Direct Mount Package Contents: Stainless Steel Straps x4 M8x16 Screw x4 Washer x4 Spring Washer-8 x4 Items Needed: PTZ Camera Power Cable Ethernet Cable Standard / Compact Pendent Mount and equipped items (optional accessory) Pole Wide Direct Mount Waterproof Rubber... - Page 23 Installation Guide 4) Attach the Waterproof Rubber to the Standard / Compact Pendent Mount. 5) Thread the cable(s) through the Mounting Kit and join the Mounting Kit to the Standard / Compact Pendent Mount with the supplied screws and washers. Then adjust the Waterproof Rubber to the joint. 6) Connect the cable(s) to the PTZ Camera.