Wheel Removal - Honda H6522 Owner's Manual

12. Wheel removal
Do not attempt to remove a wheel unless the tractor is on firm level
ground.
Do not attempt to remove or replace a tire unless you have the equipment
and knowledge to do so properly.
m Tires weighted with liquid can weigh more than 91 kg (200 lb).
Use appropriate lifting and supporting equipment.
1. Set the parking brake and put the transmission in gear.
2. Block the wheels securely and loosen the lug nuts and bolts
counterclockwise one turn.
3. Place a jack under the jack point nearest the wheel you are removing
and raise the wheel off the ground.
4. Remove the nuts and wheel.
5. Install the wheel and hand-tighten the nuts.
6. Lower the tractor, remove the jack, and then tighten the nuts a little at a
time in an "X" pattern.
Specified torque: Front wheel nut 130 kg-m (94 ft-lb)
Rear wheel nut, bolt 18.5 kg-in (134 h-lb)
[JACK POINTS]
FRONT
REAR
106