Pto Selector; Stationary Pto Switch/Indicator - Honda H6522 Owner's Manual

2. PTO Selector
Power may be transmitted to the rear PTO shaft, the mid PTO shaft, or
both. Before moving the PTO Selector, place the PTO Clutch Lever
"OFF".
-1 . . . . .
ri-,
Rear PTO is powered.
-1
&m
. . . . .
Both PTOs are powered.
. . . . .
Mid PTO is powered.
PTO SELECTOR
3. Stationary PTO Switch/Indicator
The rear PTO may be used to power various stationary attachments
without an operator being seated.
To use the Stationary PTO:
1.
2.
3.
4.
5.
6.
30
Move the PTO Selector to "REAR" position. (The stationary PTO will
not operate in "MID" or "BOTH" positions.)
Place the main transmission selector in neutral (N).
Set the parking brake.
Without sitting in the operator's seat, press the stationary PTO
switch. The indicator light will come on.
The PTO clutch lever may now be moved "ON" or "OFF" from
beside the tractor.
The stationary PTO will turn off when the operator sits in the seat
and the indicator light will go off.
STATIONARY PTO
--
STATIONARY PTO