Two And Four Wheel; Lock Pedal (A4 Type Only) - Honda H5013 Owner's Manual

10. Two and four Wheel Drive Select Lever (A4 Type only)
Two and four wheel drive can be selected by operating this lever. To shift
into four Wheel Drive, move the shift lever up to the four Wheel Drive posi-
tion. For two Wheel Drive, move the shift lever down to the two Wheel
Drive position.
( IMPORTANT
NOTICE 1 B
e
f
ore shifting the lever, be sure to bring the tractor
to a complete stop and depress the clutch pedal fully.
For
52.
operation
of the two-and four-wheel drive select lever, refer to page
DRIVE SELECT LEVER
11, Differential lock pedal (A4 Type only)
When greater straight-line traction is desired on loose or soft terrain,
pushing and holding the pedal locks the differential, causing the rear
wheels to rotate at the same speed. For normal operation, the pedal should
be released (unlocked) so that the differential allows one rear wheel to
rotate at a different speed than the other around curves.
To release the lock remove your foot from the pedal.
For operation of the differential lock, refer to Page 50.
21