(5)
Cover vent holes with damp rags, Do not allow the rag to touch the
battery
terminals.
(6)
Attach
the red clamp to the positive
(red, (+) or pos.) terminal
of the
dead
battery
and clamp
the
other
end of the
same
cable
to the
positive
(red, (+) or pos.) termianl
of the helper bettery.
(7)
Clamp the other cable to the negative
(black,
(-) or neg.) terminal
of
the helper battery.
(8)
Clamp the other end to the engine block or frame of the disabled trac-
tor as far from the dead battery
as possible.
(9)
Start
the helper
vehicle
and let its engine
run for a few
moments.
Start the disabled
tractor.
(I 0) Disconnect
the jumper
cables
in the exact
reverse
order of attach-
ment.
(Steps
8, 7 and 6).
(I 1) Remove
and discard
the damp rags since they may contain
sulfuric
acid. Reinstall
the vent caps.
12