Honda H6522 Owner's Manual page 12

(2) Keep the PTO shaft cover in place at all times. Replace the PTO shaft
cap when the shaft is not in use.
(3) Before installing or using PTO driven equipment, read the manufac-
turer's manual and review the safety labels attached to the
equiprnent.
(4) Operate PTO-driven equipment at or below the rated RPM marked on
the tachometer.
(5) When operating stationary PTO-driven equipment, always apply the
tractor parking brake and place chocks behind and in front of the rear
wheels. Stay clear of all rotating parts.
6. Using 3-point hitch
(I I Use the 3-point hitch only with equipment designed for 3-point hitch
usage.
(2) When using a 3-point hitch mounted implement, be sure to install any
recommended counter-weight on the front of the tractor.
(3) When transporting on the road, set the implement lowering control in
the "lock" positon to hold the implement in the raised position.
7. Servicing the tractor
Before servicing the tractor, park it on a firm level surface, set the parking
brake, place the gear shift lever in neutral and stop the engine.
(1) Allow the tractor time to cool off before working on or near the
engine, muffler, radiator, etc.
(2) Always stop the engine before refueling. Avoid spills and overfilling.
(3) Do not smoke when working around battery or when refueling. Keep
all sparks and flames away from battery and fuel tank. The battery
presents an explosion hazard because it gives off hydrogen and
oxygen; especially when recharging.
(4) Before "jumping" a dead battery,
read and follow all of the
instructions.
(5) Keep first aid kit and fire extinguisher handy at all times.
10