Honda Harmony H2013HDA Owner's Manual page 87

MAINTENANCE
Inspecting For A Bent Blade
Perform this inspection prior to attempting any mower deck leveling
adjustments.
1. Wearing heavy gloves, position the right
(discharge) side blade so it is parallel to the
front axle.
2. Measure the height of the right side blade at
point B and record this measurement.
3. Rotate the right side blade 180 degrees and
measure the other tip at point B.
4. The two measurements should be the same;
if they are not, the blade or blade spindle may
be bent.
5. Repeat steps 1 - 4 for the left side blade but
measure at point A.
Blade Bolt Tightness
771 BAAAACDR
Blade bolt tightness should be checked as specified in the
Maintenance Schedule (page 60).
;
A -
The blades are sharp, and spin at high
speed.
A spinning blade can cut you severely
and can amputate fingers and toes.
l
Wear protective footwear.
l
Keep your hands and feet away from
the mower deck while the engine is
running.
l
Stop the engine before performing
any adjustment, inspection, or
maintenance.
85