Fuse Replacement - Honda Harmony H2013HDA Owner's Manual

MAINTENANCE
Installation
1. With the seat raised and locked, install the battery in the
compartment. The battery terminals should face the rear.
2. Install the positive (+) cable on the battery positive (+) terminal;
then install the negative (-) cable on the battery negative (-)
terminal, then lower and lock the seat.
Fuse Replacement
The fuse and fuse holder are next to the positive (+) connector near
the battery. The lawn tractor will not start if the fuse is blown. To
replace the fuse:
1. Turn the ignition switch to OFF, then raise and lock the seat.
I
2. The fuse used in the lawn tractor is a blade type. Grip the edge of
the fuse with one hand and
the fuse holder with the
FUSE: 5 AMP5
other. Pull the fuse straight
out of the holder.
3. An open (blown) fuse is
indicated by a broken link,
visible between the two
blades on the fuse. Discard
an open fuse, and replace it
with one of the same rating
(5 amps).
772MAAAA.CDR
0 Cl
4. If replacement fuses continue to open,
@
GOOD OPEN
determine the cause, and correct the
771MAAAA.CDR
problem before operating the lawn tractor
further.
1 NOTICE 1
Never use a fuse with a different rating from that specified.
Serious damage to the electrical system or fire may result.
I
76