Blade Bolt Tightness/Blade Replacement - Honda H3013H Owner's Manual

Blade bolt tightness/Blade replacement
m To avoid severe personal Injury, remove the ignition key and
disconnect the spark plug cap to prevent accidental starting; wear heavy
gloves to protect your hands from the cutter blade.
n
Blade bolt tightness
-1.
1;:
-4.
Remove the cutter deck from the riding mower (see pages 52- 541.
Turn the cutter deck upside down.
Clean dirt and grass from the blade and the inside of the cutter deck.
Hold the blade firmly, and use a torque wrench to check that ,the
blade bolt is properly tightened.
Blade bolt torque: 4.5-5.5 kg-m (32.6-39.8 ft-lb)
TOROUE WRENCH
H Blade removal
r::
Hold the blade firmly, and remove the blade bolt and the washer.
Remove the blade and blade holder.
BLADE BOLT
BLADE
BLADE
.BLADE HOLDER
58