Honda H3013H Owner's Manual page 30

4. If either of the blades shows signs of damage or excessive wear,
remove the cutter deck, and thoroughly.inspect the blades (see cutter
deck removal instructions on page 52). Dull blades can be sharpened,
but blades that are worn out, bent, cracked, or otherwise damaged
must be replaced. If the blades need sharpening or replacement, take
the cutter deck to your authorized Honda riding mower dealer. Or, if you
have the proper tools, you can remove and install the blades yourself
(see blade removal and installation instructions on pages 58-59).
Broken pieces thrown from a worn or damaged blade can cause serious in-
jury. Always inspect the blades before using the mower.
IMPORTANT NOTICE ]
l
Use a genuine Honda replacement blades, or equivalent.
l
To reduce the possibility of weakening the blades, or causing imbalance
or poor cutting performance, sharpening should be performed by an
authorized Honda riding mower dealer.
28