D-Link AirPro DWL-6000AP User Manual page 39

2.4 ghz / 5 ghz multimode

Hide thumbs Also See for AirPro DWL-6000AP:

Table of Contents

Checking the IP Address in Windows XP/2000

Type ipconfig /renew at the prompt to get a new IP Address. Press Enter. The new IP Address is

shown below.

(Windows 98/ME users: go to Start > Run. Type Command. Type winipcfg at the prompt. The

Windows IP Configuration menu will come up. Click Release, then Renew to obtain a new IP

Address.)

Assigning a Static IP Address

Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses to the

computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If

you are using a DHCP-capable Gateway/Router you will not need to assign Static IP Addresses.

If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IP

Address, please follow these instructions:

•

Go to Start

•

Double-click on

Control Panel

AirPro DWL-6000AP

Table of Contents