D-Link AirPro DWL-6000AP User Manual page 12

Home > Wireless
In the Wireless
Settings window,
choose the wireless
environment you want
to configure from the
Wireless Band drop-
down menu. You can
change the SSID and
Channel for the IEEE
wireless environment
you are configuring.
SSID: (Service Set Identifier) "default" is the default setting. The SSID is a unique name that
identifies a network.
communicate on the network. If you choose to change the SSID from the default setting, input your
new SSID name in this field. The SSID can be up to 32 characters in length.
Channel: Available channels depend on the regulations in you are or country. Use the Setup Wizard
to select the country or region for your Access Point. The Setup Wizard is described in the Quick
Installation Guide and you can launch it from the Home tab by clicking Wizard. All devices on the
network must be set to the same channel to communicate on the network.
Radio Frequency: This read only display will change according to the channel selected.
Click Help at any time for more information.
Click Apply if you have made any changes or additions.
Note: To configure a "Preferred BSSID" for wireless adapters using the Access Point you need the
MAC address of the device. You can find the MAC address of the Access Point listed in the Status –
Device Information menu.
AirPro DWL-6000AP
All devices on a network must share the same SSID name in order to
10