D-Link AirPro DWL-6000AP User Manual page 26

•
Check that the IP Address assigned to the wireless adapter is within the same IP Address
range as the access point and gateway. Since the DWL-6000AP has an IP Address of
192.168.0.50, wireless adapters must have an IP Address in the same range, e.g.,
192.168.0.x. Each device must have a unique IP Address; no two devices may have the
same IP Address. The subnet mask must be the same for all the computers on the network.)
To check the IP Address assigned to the wireless adapter, double-click on the Local Area
Connection icon in the taskbar > select the Support tab and the IP Address will be
displayed. (Please refer to Checking the IP Address in the Networking Basics section of
this manual.)
•
If it is necessary to assign a Static IP Address to the wireless adapter, please refer to the
appropriate section in Networking Basics. If you are entering a DNS Server address you
must also enter the Default Gateway Address. (Remember that if you have a DHCP-
capable router, you will not need to assign a Static IP Address. See Networking Basics:
Assigning a Static IP Address.)
3. Check that the drivers for the network adapters are installed properly.
You may be using different network adapters than those illustrated here, but this procedure will remain
the same, regardless of the type of network adapters you are using.
•
Go to Start
•
Right-click on
My Computer
•
Click Properties
AirPro DWL-6000AP
default
24