Voice Messages (Message Waiting Indicator); Shared Call Appearance (Sca) - Grandstream Networks GXP2130 User Manual

ReConf softkey right after the conference call is split.

Cancel Conference.
 If users decides not to conference after establishing the second call, press EndCall softkey instead
of the ConfCall softkey/CONF key;
 This will end the second call and the screen will show the first call on hold.

End Conference.
 Press HOLD key to split the conference call. The conference call will be ended with both calls on
hold; Or
 Users could press the EndCall softkey or simply hang up the call to terminate the conference call.
Note:

The party that starts the conference call has to remain in the conference for its entire duration, you can
put the party on mute but it must remain in the conversation. Also, this is not applicable when the
feature "Transfer on Conference Hangup" is turned on.

The option "Disable Conference" has to be set to "No" to establish conference.

When using Easy Conference Mode, use SEND key to dial out the second call instead of using #,
even when # could be used as SEND in normal phone calls.

VOICE MESSAGES (MESSAGE WAITING INDICATOR)

A blinking red MWI (Message Waiting Indicator) on the top right corner of the phone indicates a message
is waiting. Dial into the voicemail box to retrieve the message by entering the voice mail number of the
server or pressing the Voicemail button (Voice Mail User ID has to be properly configured as the voice mail
number under Web GUI->Account x->General Settings). An IVR will prompt the user through the process
of message retrieval.

SHARED CALL APPEARANCE (SCA)

The GXP2130/GXP2140/GXP2160 phone supports shared call appearance by Broadsoft standard. This
feature allows members of the SCA group to shared SIP lines and provides status monitoring (idle, active,
progressing, hold) of the shared line. When there is an incoming call designated for the SCA group, all of
the members of the group will be notified of an incoming call and will be able to answer the call from the
phone with the SCA extension registered.
GXP2130/GXP2140/GXP2160 USER GUIDE Page 35 of 43