Installation; Equipment Packaging; Connecting Your Phone; Table 6: Gxp2130/Gxp2140/Gxp2160 Equipment Packaging - Grandstream Networks GXP2130 User Manual

EQUIPMENT PACKAGING

Main Case
Handset
Phone Cord
Power Adaptor
Ethernet Cable
Phone Stand
Wall Mount
Quick Start Guide

CONNECTING YOUR PHONE

Handset Port
Headset Port
USB Port
LAN Port
PC Port
EXT Port
Power Jack
To set up the GXP2130/GXP2140/GXP2160, follow the steps below:
1. Attach the phone stand or wall mount to the back of the phone where there are slots;
2. Connect the handset and main phone case with the phone cord;
3. Connect the LAN port of the phone to the RJ45 socket of a hub/switch or a router (LAN side of the
router) using the Ethernet cable;
4. Connect the 12V DC output plug to the power jack on the phone; plug the power adapter into an
electrical outlet. If PoE switch is used in step 3, this step could be skipped;
5. The LCD will display provisioning or firmware upgrade information. Before continuing, please wait for
the date/time display to show up;
GXP2130/GXP2140/GXP2160 USER GUIDE

INSTALLATION

Table 6: GXP2130/GXP2140/GXP2160 EQUIPMENT PACKAGING

Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes

Table 7: GXP2130/GXP2140/GXP2160 CONNECTORS

RJ9 handset connector port
RJ9 headset connector port (supporting EHS with Plantronics headset)
USB port connecting a USB flash drive. (not on GXP2130 )
10/100/1000Mbps RJ-45 port connecting to Ethernet
10/100/1000Mbps RJ-45 port connecting to PC
RJ11 connector port to connect the GXP2200EXT Board(GXP2140)
12V DC Power connector port
1
1
1
1
1
1
1
1
Page 15 of 43