System - D-Link DHP-W306AV User Manual

Section 3 - Configuration
Save to Local
Use this option to save the current access point
Hard Drive:
configuration settings to a file on the computer you
are using. Click the Save button. You will then see
a file dialog where you can select a location and
file name for the settings.
Upload from Local
Use this option to load previously saved access
Hard Drive:
point configuration settings. Click Browse to find a
previously saved configuration file. Then, click the
Upload Settings button to transfer those settings
to the access point.
Restore to Factory
This option will restore all configuration settings
Default:
back to the settings that were in effect at the time
the access point was shipped from the factory.
Any settings that have not been saved will be
lost, including any rules that you have created. If
you would like to save the current access point
configuration settings, use the Save button above.
Note: Restoring the factory default settings
will not reset the Wi-Fi Protected Status to Not
Configured.
Reboot the Device:
Click to reboot the access point.
D-Link DHP-W306AV User Manual

System

34