D-Link DHP-W306AV User Manual page 16

Section 3 - Configuration
Network Name: You can set the name of your network and to make
it either public or private. Make sure the Network
Name of all of the devices within your Powerline
network is the same.
Public Network
Select this option if you would like to make your
Name:
powerline network public with the default Network
Name of "HomePlugAV". Since this is a commonly
used Network Name, it is less secure than a private
Network Name.
Private Network
Select this option if you wish to make your powerline
Name:
network more secure by using a private Network
Name. Type the name of your private Powerline
network in the field.
Add Member:
This section lets you add new Powerline AV devices
to your Powerline network. To add a new device, give
it a Device Name and enter its Password, then click
Add. When you add a device it is given the current
Network Name.
Scan:
Scan for new Powerline devices.
Device Name:
Type a name you wish to use to identify a specific
Powerline AV device. For example, "Jack's room".
MAC Address:
You can find the MAC address printed on the back
of your device.
Password:
The Password is used to verify that you are
authorized to perform changes on a device. You can
find the Password printed on the back of your device.
D-Link DHP-W306AV User Manual 16