OUTBOARD MOTOR STAND
If the outboard motor will be
removed from the boat for storage,
we recommend storing it vertically
by mounting it on a stand.
PROTECTOR
If it is necessary to store the outboard
motor horizontally as shown, drain
the vapor separator (p.
80
the engine oil (p.
60
), before
removing the outboard motor from
the boat.
Rest the motor on a cushion of
protective material.
Cover the outboard motor to keep out
dust. Do not use sheet plastic as a
dust cover. A nonporous cover will
trap moisture, promoting rust and
corrosion.
REMOVAL FROM STORAGE
Check your outboard motor as
described in the
OPERATION
If the cylinders were coated with oil
during storage preparation, the
engine may smoke briefly at startup.
This is normal.
), and drain
STORAGE
BEFORE
chapter of this manual.
83