Water Separator Inspection And Service - Honda Outboard Motor BF135A Owner's Manual

SERVICING YOUR OUTBOARD MOTOR
Water Separator Inspection and
Service
WATER SEPARATOR
The water separator is located beside
the oil level dipstick. Water
accumulation in the water separator
can cause loss of power or hard
starting. Check the water separator
periodically. Clean it or consult with
an authorized Honda outboard motor
dealer for cleaning.
74
Gasoline is highly
flammable and explosive.
You can be burned or
seriously injured when
handling fuel.
Stop the engine and keep
heat, sparks, and flame
away.
Handle fuel only
outdoors.
Wipe up spills
immediately.
FUEL TUBES
SCREW (3)
SUSPENSION STRAP
1. Remove the engine cover (see
page 59 ).
2. Remove the suspension strap from
the water separator bracket, then
remove the separator assembly
from the strap.
During removal of the separator
assembly, take care not to damage
the wire harness with the separator
bracket.
3. Pinch the fuel tubes with tube clips
to prevent fuel leakage.