Dispenser - LG GR-B197WVS Service Manual

HOW TO DISASSEMBLE AND ASSEMBLE

5. DISPENSER

1) Disconnect button assembly by pulling down until it
stops and then pulling forward.
Button
2) Remove display frame Assembly by making a gap
between a display frame Assembly. and funnel
Assembly. with a balde screwdriver and pulling it
forward. The cover dispenser is fixed with a hook.
3) Display Assembly can be disconnected by pressing the
upper part of a cover dispenser and pushing a display
Assembly. after disconnecting display frame Assembly.
housing.
4) Loosen four screws with a phillips screwdriver and pull a
funnel Assembly to disconnect.
Funnel Assembly
5) Duct cap Assembly is disconnected if hold lever
connecting screw is loosened with a phillips screwdriver.
6) For assembling a duct cap Assembly, insert one end of
a spring into the right hole of dispenser lever, and insert
the other end into the right hole in upper part of
dispenser. And then assemble a holder lever after fixing
a holder at a solenoid Assembly working part.
Solenoid Assy
- 108 -
Funnel
Assembly
Solenoid Assembly
Holder
Lever
Cap Assembly,
Heater, Sheet
Spring
Lever,Dispenser
Duct