D-Link AirPlus DI-714P+ Manual page 77

Troubleshooting
7. Resetting the DI-714P+ to Factory Default Settings
After you have tried other methods for troubleshooting your network, you
may choose to Reset the DI-714P+ to the factory default settings.
Remember that D-Link AirPlus products network together, out of the box,
at the factory default settings.
To hard-reset the D-Link AirPlus DI-714P+ to Factory Default Settings,
please do the following:
Turn off the DI-714P+
Locate the Reset button on the back of the DI-714P+
Use a paper clip to press the Reset button and
power on.
Hold for about 5 seconds (don't hold too long) and
then release. (Or, release when M1 and M2 flash
at the same time.)
After you have completed the above steps, the DI-714P+
will be reset to the factory default settings
77