D-Link AirPlus DI-714P+ Manual page 20

Using the Configuration Menu
Home > DHCP
DHCP stands for Dynamic Host Control Protocol. The DI-714P+ has a built-in DHCP
server. The DHCP Server will automatically assign an IP address to the computers on
the LAN/private network. Be sure to set your computers to be DHCP clients by setting
their TCP/IP settings to "Obtain an IP Address Automatically." When you turn your
computers on, they will automatically load the proper TCP/IP settings provided by the
DI-714P+. The DHCP Server will automatically allocate an unused IP address from the
IP address pool to the requesting computer. You must specify the starting and ending
address of the IP address pool.
DHCP Server-
IP Pool Starting
Address-
IP Pool Ending
Address-
Lease Time-
DHCP Clients List
Enable or disable the DHCP service
The starting IP address for the DHCP server's IP assignment
The ending IP address for the DHCP server's IP assignment
The length of time for the DHCP lease
-
Lists the DHCP clients connected to the DI-714P+. Click Re-
fresh to update the list. The table will show the Host Name, IP
Address, and MAC Address of the DHCP client computer.
20