D-Link AirPlus DI-714P+ Manual page 10

Getting Started
Please refer to the following
sections of this manual for
additional information about
setting up a network:
Networking Basics - learn
how to check and assign
your IP Address; share
printers and files.
Using the Configuration
Menu - learn the settings for
the DI-714P+, using the web-
based interface.
Troubleshooting - learn
how to check for common
installation issues and other
tips for troubleshooting.
Please remember that D-Link AirPlus wireless devices are pre-configured to connect
together, right out of the box, with their default settings.
For a typical wireless setup at home (as shown above), please do the
following:
You will need broadband Internet access (a Cable or DSL subscription line into
your home or office)
Consult with your Cable or DSL provider for proper installation of the modem
Connect the Cable or DSL modem to the DI-714P+ wireless broadband router
(see the Quick Installation Guide included with the DI-714P+.)
If you are connecting a desktop computer to your network, you can install the
D-Link AirPlus DWL-520+ wireless PCI adapter into an available PCI slot. (See
the Quick Installation Guide included with the DWL-520+.)
If you are connecting a laptop computer to your network, install the drivers for
the wireless cardbus adapter (e.g., D-Link AirPlus DWL-650+) into a laptop
computer.(See the Quick Installation Guide included with the DWL-650+.)
Connect your printer to the printer port on the DI-714P+. Please refer to the
quick installation guide for loading the print server software.
2
4
1
3
5
6
10