D-Link AirPlus DI-714P+ Manual page 31

Using the Configuration Menu
Tools > System
The current system settings can be saved as a file onto the local hard drive. The
saved file or any other saved setting file created by the DI-714P+ can be uploaded into
the unit. To reload a system settings file, click on "Browse" to search the local hard
drive for the file to be used. The device can also be reset back to factory default
settings by clicking on "Reset to Default" button. Use the restore feature only if
necessary. This will erase previously save settings for the unit. Make sure to save
your system settings before doing a factory restore.
Save Settings to
Local Hard Drive-
Load Settings from
Local Hard Drive-
Restore to Factory
Default Settings-
Click Save to save the current settings to the local Hard Drive
Click Browse to find the settings file, then click Load
Click Restore to restore the factory default settings
31