Connecting the Server Enclosure to a Rack PDU
WARNING:
the PDU is energized. Turn off the PDU breaker switches to avoid potentially
serious or fatal electrical shock. Move the PDU A, B, and C breaker switches to
the "OFF" position.
1 Unlock the cable cover. See Figure 4-15.
2 Rotate the cover back and away from the PDU. See Figure 4-15.
Figure 4-15. Opening the PDU Cover
1
cable cover
3 Depending on the type of power cable used, connect the server enclosure
power cable to the PDU power bus bar or the power sockets.
For connecting the power cables to the PDU's front power socket, go to
step 6.
Do not connect or disconnect power cables to the PDU device while
1
2
lock
Rack Mount Configuration
2
239