Installing The Psu2/4 Module Assembly - Dell PowerEdge C8000 Hardware Owner's Manual

4 Lift the module assembly from the sled tray and then disconnect the
power cable from the power supply. See Figure 3-11.
5 Remove the module assembly from the sled tray. See Figure 3-11.
Figure 3-11. Removing and Installing a PSU2/4 Module Assembly
1 PSU power cable
3 thumbscrew
5 air baffle

Installing the PSU2/4 Module Assembly

CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Connect the power cable to the new PSU module. See Figure 3-10 for
cable routing.
2 Position the PSU2/4 module assembly on top of the sled tray.
204
Installing System Components
Many repairs may only be done by a certified service technician. You
2 screw
4 PSU2/4 module assembly