Dell PowerEdge C5230 Hardware Owner's Manual page 117

Installing a 2.5-inch Hard Drive Board
1 Holding the board by the edges, place the hard drive board into the sled
and connect to the system board .
2 Replace the eight screws to secure it in place .
Figure 3-23. Securing the 2.5" Hard Drive Board
3 Connect the four SATA cables between the hard drive board and the
system board.
Figure 3-24. Connecting the SATA Cables
2.5" HDD 2.5" HDD
HDD0 HDD1
Removing a 3.5-inch Hard Drive Board
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Remove the hard drives. See "Removing a 3.5-inch Hard Drive" on
page 112.
2 Remove the eight screws from the hard drive board .
2.5" HDD 2.5" HDD
HDD2 HDD3
HDD3 HDD3 HDD3
HDD2 HDD2 HDD2
HDD1 HDD1 HDD1
HDD0 HDD0 HDD0
Installing System Components
SATA3 SATA3 SATA3
SATA2 SATA2 SATA2
SATA1 SATA1 SATA1
SATA0 SATA0 SATA0
117