1.5 Connecting and Installation
1.5.1 How to connect the receiver to various other systems
There are several ways of connecting the receiver to your TV, VCR and/or Hi-Fi SYSTEM. Consult your local
supplier for assistance in setting-up your system that is best suited to your requirements.
1.5.2 To Connect Cable
• Connect one end of RF cable to the ANT IN on the back of the receiver and the other end to a Cable
antenna connection or the jack for the public antenna on the wall.
1.5.3 Connect the receiver to a TV set
• Connect the receiver to a TV set with SCART, if your TV set is equipped for it. Alternatively you can use A/V,
TV out (UHF) or S/Video jacks.
1.5.4 Connect the receiver to a VCR
• Connect the SCART jack from the VCR to the back of the receiver.
• Cable Receiver
8
• Cable Receiver
• Connect the delivered LOOP cable of about
15 cm according to the picture.
• Video
• TV
• Cable Receiver