Table of Contents
Advertisement
4.4 System Setting
Menu Lock
If the Menu Lock is already set, the PIN code is needed to set the Edit
Channel List and System Setting.
If you want to set the Menu Lock, press the
Locked and then press the
Parental Lock
When you change
"Parental
get or not from that set values. If you select "On", you may need PIN
code every time you select the lock channel program as you set in the
channel control.
If you select "Off", you can see all channels without PIN code.
Receiver Lock
If you select "On", you will have to enter the PIN code every time you
start the receiver from standby.
Change PIN Code
From here you can change the PIN code from the standard 0000.
DO NOT FORGET IT! Without it, you are not able to access to any of
the functions where the code is required.
You can change password for Parental Lock and Receiver Lock
simultaneously.
• Input the current PIN code using the
remote control.
• In the highlighted new PIN code, input a new PIN code.
• To verify the new PIN code, re-enter a new PIN code in the
highlighted confirm PIN code. If the PIN code is correct,
the message "Success" will be displayed on the display window.
Note
• If you forget the PIN code, press the RGYB(Color) button in sequence.
(i.e. Red
Green
Yellow
to 0000.
Auto Power (option)
• If the Auto Power is set to On and power is off, the Set turns on
automatically and turns into the channel mode which you were
watching before power breakdown.
• If the Auto Power is set to Off and power is off, the Set turns into the
standby mode.
Rating Lock/Modify Maturity rating (option)
• If you select "on", you can change the modifying maturity rating.
This function is - if you want the limited age, rating lock function
select.
• Press the
UP/DOWN
UP/DOWN
OK
button.
Lock" to "On" or "Off", service channel can
NUMERIC
Blue button) The PIN code will be changed
buttons to select 4 ~18 age.
buttons to select
buttons on the
27
Advertisement
Table of Contents
