Quick Guide
Before turning on the power
1
AERIAL IN
1
Connect the antenna (IEC 169-2)
75 Ω coaxial cable, CAI Benchmarked cable such as Triax TX100
2
Connect the HDMI cable
3
Connect the power adaptor and switch on at the socket
Initial auto installation
When the Receiver is powered on for the first time, the First Time Installation screen appears.
Follow the on-screen instructions to search for all available channels.
1
Ensure the antenna cable is connected before switching on.
2
Switch on the power socket.
3
Press
on the Receiver or Remote Control.
•
The First Time Installation screen is displayed.
4
Press OK to start the channel search.
•
The Receiver will search for, sort and store all receivable channels.
NOTE
•
The First Time Installation process will be
aborted if the Receiver is left unattended
for more than 30 minutes before searching
for channels.
•
After the First Time Installation has been
completed, the default PIN is automatically
set to '0000'. To change the PIN setting,
refer to Page 20.
RF OUT
TV
ETHERNET
HDMI
VCR
2
USB
SPDIF
DC 12V IN
OPTICAL
RS-232
3
9