Windows Xp/Windows 2000 Setup For Data & Pc Fax - Telular Phonecell SX5T CDMA2000 1X series User Manual

Windows XP/Windows 2000 Setup for Data & PC Fax
Contact your service provider to determine data/PC fax service availability, then follow these steps.
1.
Connect and Select Data Ports.
Serial Connection – default setting (Allows PC Fax, 1X Data and Circuit Switched Data)
· Use a Telular serial cable (part #1L01A042 or 81025801) to connect the computer's
serial port to the SX5T's data port.
· Enter Configuration Mode.
Press
· Set the SX5T Data Port to Serial.
Press
USB Connection (Allows PC Fax, 1X Data and Circuit Switched Data)
· Use a Telular USB cable (part #1L01A043 or 81025901) to connect the computer's
USB port to the SX5T's data port. (You will also need to run the Telular USB Driver
CD to load the appropriate USB driver onto your PC.)
· Enter Configuration Mode.
Press
· Set the SX5T Data Port to USB.
Press
Modem/Phone Connection (Allows PC Fax and Circuit Switched Data)
· Use a standard telephone cord to connect the computer's modem out port to either
of the SX5T's phone (RJ11) jacks.
· Enter Configuration Mode.
Press
· Set the SX5T Data Port to RJ11.
Press
2.
Set Baud Speed.
· Enter Configuration Mode.
Press
· For fax, set speed to 19200. Press
· For data, set speed to 115200. Press
3.
Install the SX5T as a new modem by opening the Start > Settings > Control Panel > Phone
and Modem Options > Modems tab.
Phonecell SX5T CDMA2000
®
# 0
*
# * 1
# * 0
# 1
*
# * 0
# 1
*
# 0
* *
* <lock code>
3 5 * 0
* <lock code>
3 5 1
*
*
<lock code>
1 3 1
*
#
<lock code>
# 1
*
#
*
18
#
.
#
.
#
.
#
.
#
.
0 #
*
.
.
3 6
*
1 3 6
*
2 #
.
5 #
.
User Manual