Audio Line Level; Auto-Send Delay; Frequently Dialed Numbers (Zero Delay Dialing); Call Barring - Telular Phonecell SX5T CDMA2000 1X series User Manual

Audio Line Level

# *
If using
you (see "Volume Level" on page 12), you may adjust your phone system's audio line level.
To adjust your phone system's audio line level:
• From Configuration Mode, press
0 = Low
1 = Normal (default)
2 = High

Auto-Send Delay

The auto-send delay is the amount of time the SX5T waits to dial after you make an entry on the
phone keypad. The default setting is 3 seconds and the valid range is 2-20 seconds.
To change the auto-send delay:
• From Configuration Mode, press
enter a number between 2 and 20 seconds. (For example, if you want the auto send delay to be
five seconds, press

Frequently Dialed Numbers (Zero Delay Dialing)

If you dial a phone number twice and stay connected for at least 15 seconds, the SX5T will remember
that phone number in the future and automatically send it without the auto-send delay whenever you
subsequently dial the number. This feature is enabled by default.
To enable Zero Delay Dialing (default setting):
• From Configuration Mode, press
To disable Zero Delay Dialing:
• From Configuration Mode, press

Call Barring

To avoid inadvertent service charges, you may enable your device's Call Barring feature to bar all
outgoing calls (except emergency calls).
To enable Call Barring:
• From Configuration Mode, press
#
code>
To disable Call Barring (default setting):
• From Configuration Mode, press
code>
#
Phonecell SX5T CDMA2000
®
8 #
and
# *
.
.
* 3
does not provide satisfactory volume options for
# 6 9
*
# * 1 1
1 1 * 5
# 2 1
*
# 2 1
*
# 1 4
*
# 1 4
*
13
#
* <0, 1, or 2>
* #
< 2 - 20> , where you
.)
#
1 #
* .
0 #
*
.
2 1
* *
2 0
* *
.
<lock
<lock
User Manual