ECS PF4 Extreme User Manual page 41

PCI Express PM Function (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Phoenix-AwardBIOS CMOS Setup Utility
PCI Express PM Function
PCI Express PME [Enabled]
: Move PU/PD+/-/:Change Priority
F5:Previous Values F6:Fail-Safe Defaults
PCI Express PME [Enabled]
Use this item to enable PCI activity to wake up the system from a power saving
mode.
Press <Esc> to return to the Power Management page.
3-14
Item Help
Menu Level
F10:Save ESC:Exit
F7:Optimized Defaults
ACPI Suspend Type [S3(STR)]
Use this item to define how your system suspends. In the default, S3 (STR), the
suspend mode is a suspend to RAM, i.e., the system shuts down with the exception
of a refresh current to the system memory. If you select S1 (POS), the suspend
mode is equivalent to a software power down.
Run VGABIOS if S3 Resume [Auto]
This item allows the system to initialize the VGA BIOS from S3 (Suspend to RAM)
sleep state.
Video Off Method [DPMS]
This item defines how the video is powered down to save power. This item is set to
DPMS (Display Power Management Software) by default.
Video Off In Suspend [Yes]
This option defines if the video is powered down when the system is put into suspend
mode.
Suspend Type [Stop Grant]
If this item is set to the default Stop Grant, the CPU will go into Idle Mode during power
saving mode.
MODEM Use IRQ [3]
If you want an incoming call on a modem to automatically resume the system from a
power-saving mode, use this item to specify the interrupt request line (IRQ) that is
used by the modem. You might have to connect the fax/modem to motherboard Wake
On Modem connector for this feature to work.
Suspend Mode [Disabled]