Toshiba Dual Pointing Device - Toshiba Satellite Pro M10 User Manual

Problem
Computer/printer do
not communicate
Printer error

TOSHIBA Dual Pointing Device

If you are using a USB mouse, also refer to the USB section in this
chapter and to your mouse documentation.
Touch pad/AccuPoint
Problem
Either the Touch Pad
or the AccuPoint does
not work.
On-screen pointer
does not respond to
Pad operation
The mouse pointer
moves too fast or too
slowly
Satellite Pro M10 Series
Procedure
Make sure the printer is turned on and is online
(ready to use).
Inspect the cable connecting the printer to the
computer for damage. Make sure it is securely
connected.
A parallel printer connects to the parallel port.
Make sure the ports are configured correctly.
Make sure your software is configured to
recognize the printer. Check your printer and
software documentation.
Check your printer documentation.
If problems persist, contact your dealer.
Procedure
Check the Device Select settings. Open the
Mouse properties icon and click the Dual Point
tab. Then click the Detail Setting button and click
the Device Select tab.
Check that the Touch pad is not selected. Press
Fn + F9 to enable the TOSHIBA Dual Pointing
Device.
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it.
Try changing the speed setting in the mouse
control utility.
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Pointer Options tab.
3. Set the speed as instructed and click OK.
Troubleshooting
9-16