Lcd Panel; Hard Disk Drive - Toshiba Satellite Pro M10 User Manual

LCD panel

Problem
No display
Markings appear on
the LCD.
Problems above
remain unresolved or
other problems occur

Hard disk drive

Problem
Computer does not
boot from hard disk
drive
Slow performance
Satellite Pro M10 Series
Procedure
Display might be set for an external device. Hold
down hotkeys Fn + F5 for three seconds to
return to the internal LCD.
They might have come from contact with the
keyboard or Touch pad. Try wiping the LCD
gently with a clean dry cloth. If markings remain,
use LCD cleaner. Be sure to let the LCD dry
before closing it.
Refer to your software's documentation to
determine if the software is causing the difficulty.
If problems persist, contact your dealer.
Procedure
Check if a diskette is in the diskette drive or a
disc is in the optical media drive. Remove any
diskette and/or disc and check Boot priority.
Refer to the Boot Priority section in Chapter 7,
HW Setup and Passwords.
There may be a problem with your operating
system files. Refer to your OS documentation.
Your files may be fragmented. Run SCANDISK
and defragmenter to check the condition of your
files and disk. Refer to your OS documentation
or online HELP for information on running
SCANDISK and the defragmenter.
As a last resort, reformat the hard disk. Then,
reload the operating system and other files.
If problems persist, contact your dealer.
Troubleshooting
9-8