Delay Start - LG LD-1426T Service Manual

4-2-2. LD-1416T
TRIPLE
SPRAY
• With each press, the level
of water jet is changed to
Strong, Normal and Soft
in a sequence.
RINSE
• Repeated pressing of the
Rinse button will select
Extra Hot, Rinse+.
• If you select the Extra
Hot function, the
operationg temperature
will be up to 80℃.
(Intensive, Normal, Eco)
• When you select Rinse + ,
an additional rinse cycle is
added.
INDICATOR
• Before starting, the display window shows the running time of
• Refill with
the selected program.
rinse aid
• After starting, the display window shows the remaining time.
• If the dishwasher has a trouble, the trouble type is displayed.
• Child Lock
If this error letters are displayed, please refer to the trouble
shooting guide page 35 and follow the guide.
※ "
PROGRAM CHILD LOCK
• When you want to • Used to lock or unlock the
select program, press control buttons to prevent
each button. all the setting from being
changed by a child.
• This function is
automatically canceled
when power failure occur.
• For locking/ unlocking,
press Intensive and
Normal button for a few
seconds simultaneously.
TIME LEFT
: Drainage trouble
: Problem of overfilling water
: Water inlet trouble
: Water leakage trouble
: Heater trouble
" : No error message.
BEEP ON/OFF
• The dishwasher must be
switched on.
• The beep on/off function
can be set by pressing the
Intensive and Pre-wash
button simultaneously for
a few seconds. Then, a
"on" will appear in the
time display.
• The beep on/off function
is automatically canceled
when power failure occur.
- 9 -

DELAY START

• If you want to delay the
start of selected program,
press this button before
pressing program button.
• Pressing the Delay Start
will increase time by 1
hour.
• The delay start time can be
adjusted from 1 hour to 19
hours.
POWER
• For operating, press this
button first for power on.
• After operating, this
button automatically
switches off for safety and
energy saving.
• In case of irregular surge
disturbance to the
machine, the power may
be automatically turned off
for safety.