Honda Harmony HRB215SDA Owner's Manual page 63

TROUBLESHOOTING
VIBRATION PROBLEMS
Excessive Possible Cause Correction
Vibration
1. Check mower deck and Grass and debris lodged
Clean out mower deck
blade(s). under mower deck.
(P. 35).
Blade(s) loose, bent, Tighten loose blade(s)
damaged, or unbalanced bolts. Replace damaged
by improper sharpening. blade(s) (p. 56 - 57).
2. Take mower to an Mechanical damage, such Replace or repair faulty
authorized Honda as a bent crankshaft. components as necessary
servicing dealer for
repair.
MOWING AND BAGGING PROBLEMS
Poor Cut Quality or
Poor Mowing/Bagging
Performance
1. Check that the throttle
lever is in the FAST
oosition.
2. Reduce forward speed.
3. Check cutting height
adjustment levers.
4. Check grass bag
(if equipped).
5. Check mower deck and
blade(s).
Possible Cause
Engine speed is too slow
to cut well.
Mower is moving too fast
for lawn conditions.
Adjustment levers set
at different positions.
Grass bag overfilled or
clogged.
Mower deck clogged.
Blade(s) dull, worn, or
damaged.
Wrong blade(s) installed.
Correction
Move throttle lever to
the FAST position
(P. 26).
Shift to slow speed
(p. 30), or push slower.
Set all levers at the
same cutting height
position (p. 14).
Empty the grass bag.
Wash the grass bag if
clogged with dirt (p. 58).
Clean out the mower deck
(0.35).
Sharpen or replace
blade(s) if necessary
(p. 56 - 57).
Install correct blade(s)
(p. 56 - 57).
61