4: Activation
•
Account configuration
procedures
•
Manual activation
• Automated activation
Document 2130755. Rev 1.0 May.07
Account configuration
procedures
The final step to making the AirCard ExpressCard operational
is configuring it to use your CDMA service provider account.
The process of activation configures your AirCard
ExpressCard with the required account parameters (phone
number, username, password, etc.).
If you purchased a pre‐activated AirCard ExpressCard, this
step is not necessary. Once the application software and
drivers are installed, the AirCard ExpressCard is ready for use.
Otherwise, you must use the Activation Wizard to activate and
configure your account.
Activation Wizard
The Activation Wizard walks you through the process of
configuring an account. The process and options vary based on
the service provider.
This section is a guide only. Consult the Quick Start Guide,
and follow the directions on screen and instructions given by
your service provider representative.
If your AirCard ExpressCard does not have an activated
account, and Watcher has started automatically, then the
Activation Wizard should start automatically. If this does not
happen:
1.
Ensure Watcher is running. If it is not, double‐click the
Watcher icon
on your desktop.
2.
Start the Activation Wizard: select
Activation Wizard.
To begin activation of the AirCard ExpressCard, click
TOOLS >
Next
.
19
4