3: Installation
•
System requirements
• Installation
•
Inserting the AirCard
ExpressCard
•
Removing the AirCard
ExpressCard
Document 2130755. Rev 1.0 May.07
This chapter guides you through the steps necessary to install
the AirCard ExpressCard on a notebook computer.
Note: Do not insert the AirCard ExpressCard into your ExpressCard
slot before installing the software.
The basic steps are:
1.
Insert the AirCard 597E installation CD into your
CD‐ROM drive and install Watcher.
2.
Insert the AirCard ExpressCard into the ExpressCard
slot
(page
17) to install the AirCard ExpressCard drivers.
3.
If the AirCard ExpressCard has not been pre‐activated, use
the Activation Wizard to configure the AirCard
ExpressCard (as described in "Activation" on page 19).
Before you begin the installation process, ensure your PC is
running a supported operating system and meets the
hardware requirements described in the next section.
System requirements
The AirCard ExpressCard is supported on notebook PCs
running:
•
Windows Vista
•
Windows XP (Home and Professional versions) with
Service Pack 2
•
Windows 2000 with Service Pack 4 and roll‐up 1
•
Mac OS X (supported through the Watcher Lite software—
available online from the Support section at
www.sierrawireless.com)
3
15