Throttle Cable Adjustment - Honda HR215 Owner's Manual

9. MAINTENANCE
THROrrLE CABLE ADJUSTMENT
1.
2.
3.
When the throttle lever is moved to
the CHOKE position, the carburetor
choke arm should move all the way
counterclockwise, as far as it will
go. Push the choke arm with your
finger to check that it has moved
as far as it will go.
If adjustment is necessary, loosen
the throttle control cable lock nuts
with a 10 mm wrench, and move
the adjuster up or down as required.
Tighten the lock nuts and recheck
carburetor choke arm movement.
Start the engine, and check to be
sure the engine stops when the
throttle lever is moved to the STOP
position. Readjust the cable if
necessary.
HR215PXA
50
HR215SXA 81 HR215SMA
HR215HXA