Table of Contents
Advertisement
9. MAINTENANCE
THROlTLE
CABLE ADJUSTMENT
I
1.
2.
When the throttle lever is moved to
the CHOKE position, the carburetor
choke arm should move all the way
counterclockwise,
as far as it will go.
Push the choke arm with your finger
to check that it moves as far as it
will go.
If adjustment
is necessary,
loosen
the throttle
control cable lock nuts
with a 10 mm wrench,
and move the
adjuster
up or down
as required.
Tighten
the lock nuts and recheck
carburetor
choke arm movement.
3. Start the engine, and check to be
sure the engine
stops when
the
throttle
lever is moved to the STOP
position.
Readjust
the
cable
if
necessary.
44
Advertisement
Table of Contents
