Throttle Cable Adjustment - Honda HR195 Owner's Manual

9. MAINTENANCE
THROTTLE CABLE ADJUSTMENT r--Y
1.
2.
When the throttle lever is moved to
the CHOKE position, the carburetor
choke arm should move all the way
counterclockwise, as far as it will
go. Push the choke arm with your
finger to check that it moves as far
as it will go.
/
/;, THROTiLE LEVER
A/
If adjustment is necessary, loosen
the throttle control cable lock nuts
with a 10 mm wrench, and move
the adjuster up or down as
required. Tighten the lock nuts and
recheck carburetor choke arm
movement.
3. Start the engine, and check to be
sure the engine stops when the
throttle lever is moved to the STOP
position. Readjust the cable if
necessary.
LOCK
NUTS
ADJUSTER
44