Transporting - Honda HR195 Owner's Manual

8. TRANSPORTING
B
The engine and exhaust system become hot during operation
and remain hot for a while after stopping. Contact with hot engine components
can cause burns and can ignite some materials.
Avoid touching the engine or exhaust system for at least 15 minutes after the
engine has stopped. Allow the engine to cool before transporting the mower.
Before Loading
Turn the fuel valve to the OFF
position. This will prevent the
FUEL VALVE
possibility of carburetor flooding
and will reduce the possibility of
fuel leakage.
w
Gasoline is extremely
flammable, and gasoline vapor can
explode, causing injury or death. '
Turn the fuel valve to the OFF
position when the mower is not in
use.
Remove the grass bag.
Loading/Unloading
To reduce the possibility of fuel leakage, keep the mower level while transporting,
and avoid tilting the mower excessively when loading and unloading.
l
If a suitable loading ramp is not available, two people should lift the mower
on and off the vehicle, while holding the mower level.
l
Position the mower so all 4 wheels are on the bed of the vehicle. Tie the
mower down with rope or straps, and block the wheels. Keep the tie-down
rope or straps away from controls, adjustment levers, cables, governor arm,
carburetor, and the fuel line.
pzEiEq
If the drive clutch is engaged while rolling backward, down
the loading ramp, the drive system may become damaged. Avoid moving the
drive clutch lever while loading and unloading.
NOTE: The handlebar can be folded by loosening the handlebar locking knobs
(see page 53).
34