Honda HR195 Owner's Manual page 16

3. CONTROLS
CUTTING HEIGHT ADJUSTMENT LEVERS
serious injury. Stop the engine before
adjusting cutting height.
There are six cutting height settings:
3/4
in (2.0 cm), l-1/4 in (3.2 cm),
l-3/4 in (4.4 cm), 2- l/4 in (5.5 cm),
2-5/8 in (6.6 cm), and 3 in (7.7 cm).
These are approximate figures, as the
actual height of cut grass will vary
with lawn and soil conditions.
To adjust cutting height, pull each
adjusting lever toward the wheel, and
move it into another notch. Set all foui
adjusting levers to the same cutting
height position.
314
in.
/i
(2.0
cm)
l-114
in.
/ (3.3
cm)
/ / l-314 in.
(4.5
cm)
2-114
in.
(5.6
cm)
2-5/B
in.
(6.7
cm)
3
in.
(7.7
cm)
ADJUSTING LEVERS
ADJUSTINdl LEVER
Select the correct cutting height for your mowing requirements. Cutting height
settings of l-l /4 in (3.2 cm) to 2-l /4 in (5.5 cm) are appropriate for most
lawns during cool weather. A higher cut may be needed to protect the lawn
during hot summer months. Consult a local nursery or lawn 81 garden center
for advice about specific types of grasses and growing conditions in your area.
If you are not certain which cutting height to select, check the appearance
of the lawn after mowing a small area, then readjust cutting height if necessary.
14