Operating Instructions - Monogram Double Door, Double Drawer, Stainless Steel, Free-Standing Refrigerators Owner's Manual

Double door, double drawer, stainless steel, free-standing refrigerators
Table of Contents

Advertisement

Temperature
controls
To change the temperature, press and release
the
will come on and the display will show the set
temperature. To change the temperature, tap
either the
the desired temperature is displayed. Fresh food
temperatures can be adjusted between 34°F
and 44°F and the freezer temperatures can be
adjusted between -6°F and +6°F.
Once the desired temperature has been
set, the temperature display will return to
the actual fresh food and freezer temperatures
after 5 seconds. Several adjustments may
be required. Each time you adjust controls,
allow 24 hours for the refrigerator to reach
the temperature you have set.
Performance
The Performance Air-Flow System is designed to
maximize temperature control in the fresh food
Air Flow
and freezer compartments. This unique special
System
feature consists of the Air Tower along the top
and back walls of the fresh food compartment
and the Air Tunnel on the bottom portion of
the freezer rear wall. Placing food in front of
the louvers on these components will not affect
performance.
8
(warmer) or
(colder) pad. The SET light
(warmer) or
(colder) pad until

Operating Instructions

The temperature controls are preset in the factory at 37°F
for the fresh food compartment and 0°F for the freezer
compartment. Allow 24 hours for the temperature to stabilize
to the preset recommended settings.
The temperature controls can display both the SEt temperature
as well as the actual temperature in the fresh food and freezer
compartments. The actual temperature may vary slightly
from the SEt temperature based on usage and operating
environment.
Setting either or both controls to oFF stops cooling in both
the freezer and fresh food compartments but does not shut
off electrical power to the refrigerator.
NotE: The refrigerator is shipped with protective film covering
the temperature controls. If this film was not removed during
installation, remove it now.
To turn the cooling system off, tap
the
compartment or the freezer until the display
shows OFF. To turn the unit back on, press
the
compartment or freezer. The SET light will
illuminate on the side you selected. Then press
the
the SET light is illuminated) and it will go to
the preset points of 0°F for the freezer and 37°F
for the fresh food compartment.
Although the Air Tower and the Air Tunnel
can be removed, doing so will affect temperature
performance. (For removal instructions, on-line,
24 hours a day, contact us at GEAppliances.com
or call 800.444.1845. In Canada, call us at
1.800.561.3344.)
Stainless Steel Refrigerator
(warmer) pad for either the fresh food
(colder) pad for either the fresh food
(colder) pad again (on the side where

Advertisement

Table of Contents
loading

Table of Contents