Table of Contents
Advertisement
Automatic
icemaker
Accessing ice
and reaching
the power
switch
NotE: A newly installed refrigerator may take 12 to 24 hours to begin making ice.
The icemaker will produce seven cubes
per cycle—approximately 100–130 cubes
in a 24-hour period, depending on freezer
compartment temperature, room temperature,
number of door openings and other use
conditions.
See below for how to access ice and reach
the power switch.
If the refrigerator is operated before
the water connection is made to the icemaker,
set the power switch in the o (off) position.
When the refrigerator has been connected
to the water supply, set the power switch
to the l (on) position. The icemaker power light
will turn green when the freezer light switch is
pressed in or when the freezer door is closed.
The icemaker will fill with water when it cools to
15°F (–10°C). A newly installed refrigerator may
take 12 to 24 hours to begin making ice cubes.
You will hear a buzzing sound each time
the icemaker fills with water.
Throw away the first few batches of ice to allow
the water line to clear.
Be sure nothing interferes with the sweep
of the feeler arm.
To reach the icemaker power switch, open the top
freezer drawer and remove the full-width basket.
Always be sure to replace the basket.
To reach the power switch.
Automatic Icemaker
Stainless Steel Refrigerator
Power
Switch
Green
Feeler Arm
Power Light
When the bin fills to the level of the feeler arm,
the icemaker will stop producing ice. It is normal
for several cubes to be joined together.
If ice is not used frequently, old ice cubes will
become cloudy, taste stale and shrink.
NotE: In homes with lower-than-average water
pressure, you may hear the icemaker cycle
multiple times when making one batch of ice.
NotE: Set the power switch to the o (off) position
if the water supply is shut off.
To access ice, simply open the bottom freezer
drawer and slide out the full-width basket to expose
the ice bucket.
Ice
Bucket
To access ice.
Icemaker
17
Advertisement
Table of Contents
