Smsc Settings - QNAP VioStor NVR User Manual

5.7.2

SMSC Settings

You can configure the SMSC (Short message service center) settings to send SMS
text messages to particular mobile phone numbers when an event takes place on
the NVR. The default SMS service provider is Clickatell. You may also add your
own SMS service provider by selecting "Add SMS Provider" on the drop down menu.
When you select "Add SMS service provider", you need to enter the name of the SMS
provider and the URL template text.
Note:
• You will not be able to receive the SMS properly if the URL template text entered
does not follow your SMS service provider's standard.
• Please send a test SMS to verify the settings are correct.
• When the "Advanced mode" is in use in the "Alarm Settings", this page will
become inactive. You may go to "Camera Settings" > "Alarm Settings" >
"Advanced Mode" to edit the SMS settings or select to use the "Traditional Mode"
and configure the SMS settings on this page.
131